FM3270 Fixed Mount


Designed for Self-service Devices

It is easy for the scanner to fit into self-service devices.

IP65-rated Sealing

An IP65-rated seal renders the scanner impervious to dust, water and other contaminant.

IR/Light Triggers

The combination of IR sensor and light sensor exhibits an improved sensitivity in activating the scanner to scan barcodes as they are presented, to achieve higher throughput and productivity.

Snappy Barcode Capture

Armed with Newland’s sixth-generation of technology, this scanner excels at reading on-screen barcodes and printed barcodes.

Wide Voltage Input

Support voltage ranges from 5 ~ 24VDC

Product specifications

Decode Capability 1D, 2D
Form Factor All-in-One
Interface RS-232, USB
Illumination White LED
Dimension 78.7 x 47.7 x 67.7mm
Weight 132g


Image Sensor 640*480 CMOS
Illumination 3000K white LED
Symbologies 2D: PDF417, Data Matrix, QR Code, Micro QR, Aztec, etc
1D: EAN-13, EAN-8, UPC-A, UPC-E, ISSN, ISBN, Codabar, Interleaved 2 of 5, Code 128 (FNC1), Code 93, ITF-6, ITF-14, Industrial 2 of 5, Standard 2 of 5, Matrix 2 of 5, Code 11, GS1 Databar (RSS-Expand, RSS-Limited, RSS-14), MSI-Plessey, Code 39 (Code 39 FULL ASCII), Plessey, etc
Resolution ≥4mil (1D)
Typical Depth of Field EAN-13 (13mil): 0-170mm
Code 39 (20mil): 15-200mm
Code 128 (10mil): 0-160mm
QR Code (20mil): 0-95mm
Min. Symbol Contrast 25%
Field of View Vertical 70°,Horizontal 55°
Scan Window 45mm×45mm
Scan Modes Sense mode, Continuous mode, Command mode
Scan Angle Roll: 360°, Pitch: ±50°, Skew: ±50°


Dimensions (L×W×H) 78.7(W)×47.7(D)×67.7(H)mm (max.) (without cable)
Weight 132g
Interfaces RS-232, USB
Operating Voltage 5VDC±5%
Current@5VDC Operating (RMS): 120mA
Idle: 63mA
Notification Beeper, multi-colored LED indicator


Operating Temperature -20℃ to 60℃ (-4°F to 140°F)
Storage Temperature -40℃ to 85℃ (-40°F to 185°F)
Humidity 5%~95% (non-condensing)
ESD ±15kV (air discharge)
±8kV (direct discharge)
Sealing IP65 (not including interface)


Cable USB cable used to connect the scanner to a host device.
RS-232 cable used to connect the scanner to a host device.
Power Adapter DC5V power adapter to provide power for the scanner with RS-232 cable.


Specification Sheets
Manual & Technical Literature

Main Menu